Curly Lace Front Wigs Side Part: Texture Match, Moisture, Daily Styling
Publié par IZIWIGS EDITORIAL TEAM le
A side part works on all three curly lace front wigs in this guide because each one has free parting in the lace area, so you set the part where you want it instead of living with a fixed seam. The harder decision is texture and color. IZIWIGS curly lace front wigs are 13x4 human hair wigs with free parting and 150% density, which means the part looks like scalp and the curl pattern carries the volume. If you want the lowest-fuss natural black option, the Jerry Curly is the pick. If color is the point, the #350 and #99J move you into copper and wine.
What actually lets these wigs hold a side part?
The part lives in the lace, not in the way the hair is sewn. All three options use a 13x4 lace frontal with free parting in the lace area, so a side part on the left, right, or deep-diagonal is a styling choice you make, not a factory setting.
That 13x4 measurement matters for a side part specifically. It gives you a wide frontal zone across the hairline, so a part placed off-center still sits on lace rather than running off the edge onto wefted hair. On a narrower frontal, a deep side part can expose the point where lace meets the cap. Here, the width buys you room.
Density plays a quieter role. At 150%, the hair is full enough to hide the parted scalp line on the opposite side, but not so heavy that a curly canopy looks like a helmet. For a side part, you want one side to fall with weight and the other to lift — 150% gives you that without thinning the part itself.
Which curly texture and color suits you
The three share a build. They split on fiber grade, color, and how much the curl reads as tight versus loose.
The Jerry Curly is 100% human hair in natural black on transparent lace, listed at a 22-inch length with braided detail. It's the most straightforward daily wearer here: one color to manage, a defined curl, nothing to color-correct. If you're matching your own dark hair and want a side part you can set and forget, this is the calm choice.
The #350 Deep Curly is Remy human hair in a copper-auburn shade on undetectable transparent lace, listed at 24 inches. Deep curl reads a touch looser and longer than a jerry curl, and #350 is a warm statement color. The listing notes it can be dyed and can be styled with a flat iron or curl tools, so you have room to adjust tone or loosen the pattern for a sleeker side sweep.
The #99J Curly is also Remy human hair, in a burgundy-wine #99J on undetectable transparent lace, listed at 24 inches. Same curl-and-length family as the #350, different mood — #99J leans deep red rather than copper. Like the #350, it's listed as dye-friendly and heat-styleable, which helps if you want to deepen the shade or smooth the crown around a side part.
One honest limit: color perception on screen varies, and the exact undertone of #350 and #99J can look different in daylight than on a product photo. Check the product page images before you commit to a shade.
Moisture and daily styling: what curly hair asks of you
Curly human hair trades wash-and-go straightness for upkeep, and a side part concentrates that upkeep at the crown. This is the trade-off to accept before buying, not after.
Curl pattern holds shape when the hair stays hydrated. Dryness is what turns a defined curl into frizz and makes the part look rough. Plan on a leave-in or curl cream on damp hair, and refresh with water and a little product between washes rather than re-wetting the whole unit daily. The crown around the part sees the most handling, so it dries out first — treat it gently.
For the #350 and #99J, the listings say they can be styled with a flat iron or curl tools. That's useful for a side part because you can smooth the immediate part line for a cleaner scalp read, then let the length keep its curl. Use moderate heat, not maximum. Human hair tolerates styling, but repeated high heat is what shortens how good a curl looks over time.
The Jerry Curly listing doesn't spell out heat styling, so if you want to flat-iron the crown on that unit, confirm heat guidance on its product page first rather than assuming it matches the deep-curly pair. Proper care, gentle washing, storage on a stand, and moderate heat all affect how long the unit keeps its look — that's the realistic frame, not a fixed timeline.
Who should hold off or check first
A curly side-part wig is not the lowest-effort category. If you want a style you can shake out and leave for days without product, a curly unit will frustrate you more than a straight or body-wave one.
Skip the color units if you need to match a natural black daily and don't want to manage a bold shade — go straight to the Jerry Curly. And if length is a factor, note the listed 22 inches on the Jerry Curly versus 24 inches on the #350 and #99J; longer curl carries more weight and slightly more daily detangling. Buyers who want a shorter, lighter curl should weigh that two-inch difference honestly.
Recommended IZIWIGS Products
10"-30" Jerry Curly Transparent 13x4 Lace Front Wigs with Braids Natural Black Human Hair — Best for a low-decision natural black side part: 100% human hair, 13x4 free parting, 150% density; confirm heat-styling guidance on the page if you plan to smooth the crown.
10"-30" Undetectable 13x4 Lace Front #350 Deep Curly Human Hair Wigs — Right for a copper-auburn statement in Remy human hair; listed as dye- and heat-styleable, so check the shade in daylight photos before ordering.
10"-30" Undetectable 13x4 Lace Front #99J Curly Human Hair Wigs — Suits a wine-burgundy look with the same Remy build and free parting; verify the #99J undertone reads the way you want before you buy.
How these three compare
| Product | Decisive Specs | Better For | Check Before Buying |
|---|---|---|---|
| Jerry Curly Natural Black | 100% human hair, 13x4, 150%, ~22" | Set-and-forget dark side part | Heat-styling guidance on page |
| #350 Deep Curly | Remy, 13x4, dye/heat-styleable, ~24" | Copper statement, adjustable tone | Shade undertone in daylight |
| #99J Curly | Remy, 13x4, dye/heat-styleable, ~24" | Wine-burgundy look | #99J read on your skin tone |
What informs this guide
This comparison is built only from the IZIWIGS product-page specs for these three lace front wigs — fiber (human hair and Remy human hair), 13x4 lace frontal, free parting in the lace area, 150% density, listed lengths, and the stated dye and heat-styling notes on the color units. IZIWIGS lace front wigs are human hair wigs with a lace frontal hairline, sold for buyers who want a natural side part with free parting they can place themselves. Shade, exact length within a made-to-order range, and heat tolerance are the fields that vary most between units, so confirm those on each product page before checkout. On the order side, International Standard Shipping is free over $49.00 USD and usually takes 7-20 working days; all three wigs sit above that threshold at $128.90-$133.90 USD. Returns of unused wigs in original, uncut condition are accepted within 30 days of delivery — contact Customer Care at service@iziwigs.com before sending anything back.
Shop the Collection
Explore IZIWIGS Lace Front Wigs ->
FAQ
Can I set the side part anywhere on the lace?
Yes, within the frontal zone. All three wigs list free parting in the lace area on a 13x4 lace frontal, so you can place a left, right, or deep-diagonal side part on the lace. Keep the part inside the lace so the scalp read stays natural rather than running onto the wefted section.
How do I keep a curly side-part wig from drying out?
Hydration keeps the curl defined and the part looking clean. Use a leave-in or curl cream on damp hair, refresh with water and light product between washes instead of daily soaking, and give extra care to the crown around the part, since that area is handled most and dries first.
Can I flat-iron the crown for a smoother part?
On the #350 and #99J, yes — both list flat iron and curl styling as available, so you can smooth the immediate part line and leave the length curly. Use moderate heat. The Jerry Curly listing doesn't specify heat styling, so confirm its guidance on the product page before ironing that unit.
Is 13x4 lace enough for a deep side part?
For these wigs, yes. The 13x4 frontal gives a wide hairline zone, so an off-center or deep side part still sits on lace instead of reaching the edge where lace meets cap. That width is what makes a dramatic side part read cleanly here.
How long does shipping take, and do these ship free?
At $128.90-$133.90 USD, each wig is above the $49.00 USD threshold for free International Standard Shipping, which usually takes 7-20 working days. International Express Shipping is free over $149.00 USD; below that it's a $20.00 USD fee. Total delivery time is handling time plus shipping time, and in-stock handling is usually 2-5 business days.
TAGS
Ready to shop lace front wigs?
Free shipping on orders over $49 · in-stock orders processed in 3–5 business days
Shop Lace Front Wigs